Standard Complete Denture (Upper & Lower)

Price: 
$0.00

1. Superb fit – No human error involved. 2. Monomer=free Lucitone 199 acrylic available in a variety of shades 3. CAD/CAM designed for various arch shapes and sizes 4. Ideal balanced anatomic set-up 5. Patient's unique ID inscribed on restoration. 6 High quality Mondial teeth made with nano-pearl technology for enhanced durability and strength.

Order Information
(your patient #, account#, or case #, if applicable)
(patient initials should be entered so that you or your staff can identify the patient)



Input patient photo reference number or upload it manually
x
Drop files here to upload
or Browse
Files must be less than 1000 MB.
Allowed file types: jpg jpeg png.
Please choose whether you want to receive a Try-in or go directly to Final. * If this is your first case, you will receive a try-in denture first before going to final regardless of your case type selection.
(8 character limit, the following special characters are acceptable - / )
(C1, C2, C3 and D2 are only for removable partial dentures – Valplast)
(note: extreme cases may not be able to be designed to desired anterior overjet)
(If different sizes were used for the maxillary and mandibular arches, enter the smaller of the two.)
ex: 3.5 x 8.0 (diameter x length, mm)
ex: 3.5 x 8.0 (diameter x length, mm)
(Leave blank for same brand)
ex: 3.5 x 8.0 (diameter x length, mm)
(Leave blank for same brand)
ex: 3.5 x 8.0 (diameter x length, mm)
(Leave blank for same brand)
ex: 3.5 x 8.0 (diameter x length, mm)
(Leave blank for same brand)
ex: 3.5 x 8.0 (diameter x length, mm)
(Leave blank for same brand)
ex: 3.5 x 8.0 (diameter x length, mm)
(Leave blank for same brand)
ex: 3.5 x 8.0 (diameter x length, mm)
(Leave blank for same brand)
ex: 3.5 x 8.0 (diameter x length, mm)
(Leave blank for same brand)
ex: 3.5 x 8.0 (diameter x length, mm)
(Leave blank for same brand)
ex: 3.5 x 8.0 (diameter x length, mm)
(Leave blank for same brand)
ex: 3.5 x 8.0 (diameter x length, mm)
(Leave blank for same brand)

Scan Upload
1. CBCT DICOM (CBCT files must be zipped before uploading) or Bite STL Scan file
2. Implant-level 3D digital impression STL impression file (Single Arch - Maxillary or Mandibular / Complete - Both)
3. SA - Opposing stone scan STL
x
Drop files here to upload
or Browse
Files must be less than 1000 MB.
Allowed file types: stl obj zip dcm jpg 3oxz.