DENTCA Denture Base II for Carbon printers
Original Pink - 1 kg
The DENTCA Denture Base II resin is an FDA cleared biocompatible photocurable material. Performance and strength are the same as conventional acrylic.
In order to obtain the guaranteed results the DENTCA Denture Base II resin is to be used in conjunction with DENTCA Teeth resin for manufacture of 100% 3D printed removable dentures.
Recommended Equipment: Dymax ECE 5000 or Dreve PCU LED
Available only in 1kg presentation
Specifications:
Chracteristic/Method | Units | Specification |
---|---|---|
Before Curing | ||
Viscosity at 25 +/- 0.5 °C | cps | 1000 < x < 2000 |
Density | g/cm3 | 1.05 < x < 1.20 |
After Curing | ||
Density | g/cm3 | 1.15 < x < 1.25 |
Flexural Strength | MPa | >65 |
Flexural Modulus | MPa | >2000 |
Degree of Conversion | % | >70 |
Download the
Download the Direction for Use / Denture Fabrication Manual
Should you have any trouble with the resin or your printed parts, please feel free to reach the DENTCA Technical team by calling us at (424) 558-8726 or by emailing us at cs@dentca.com.
For specific questions about your Carbon printer or Carbon software settings used for this resin, please contact Carbon directly at support@carbon3d.com
Material order handling time:
- Overnight and 2nd day shipping orders received before 11AM Pacific time will be shipped out on the same day.
- Orders received after 11AM Pacific time, it will be shipped out on the next business day.
- For ground shipping orders, please allow up to 2 business days before it is shipped out from our facility.