DENTCA Try-in for Carbon printers
Try-In shade - 1kg
The DENTCA Try-In resin is an FDA cleared biocompatible photocurable material. Intended for the printing of evaluation Try-in Denture models that the dentist can use to evaluate cases prior to final dentures.
The DENTCA Try-in resin only comes in one available shade, which is simlar to teeth color.
Recommended Equipment: Dymax ECE 5000 or Dreve PCU LED
Available only in 1kg presentation
Specifications:
Chracteristic/Method | Units | Specification |
---|---|---|
Before Curing | ||
Viscosity at 25 +/- 0.5 °C | cps | 1000 < x < 2000 |
Density | g/cm3 | 1.05 < x < 1.20 |
After Curing | ||
Density | g/cm3 | 1.15 < x < 1.25 |
Flexural Strength | MPa | >65 |
Flexural Modulus | MPa | >2000 |
Degree of Conversion | % | >70 |
Download the
Download the Directions for Use / Denture Fabrication Manual
Should you have any trouble with the resin or your printed parts, please feel free to reach the DENTCA Technical team by calling us at (424) 558-8726 or by emailing us at cs@dentca.com.
For specific questions about your Carbon printer or Carbon software settings used for this resin, please contact Carbon directly at support@carbon3d.com
Material order handling time:
- Overnight and 2nd day shipping orders received before 11AM Pacific time will be shipped out on the same day.
- Orders received after 11AM Pacific time, it will be shipped out on the next business day.
- For ground shipping orders, please allow up to 2 business days before it is shipped out from our facility.